Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill. Product Type: Pneumatic Self-Feed Twin Drill Free Speed: 900RPM Gear Reduction: Double Stroke Length: 1-1/4” / 32mm
Product image may not represent exact model.
>
The 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is an advanced dual-spindle drilling solution engineered for high-efficiency production environments. Built to perform two machining operations per cycle, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill dramatically increases throughput while maintaining precision for hole center distances from 3/8” to 3-3/4”. This makes the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill ideal for close-center, high-volume aerospace and industrial machining.
Like all Ingersoll Rand automatic production tools, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is a fully self-contained unit with integrated cycle, feed rate, and motor controls. Its adjustable dual spindle heads allow operators to adapt quickly as machining requirements evolve, while the available American and metric collet ranges accommodate a wide variety of hole diameters and material specifications. Whether operating as a stand-alone tool or in conjunction with other automated components, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill delivers reliable, repeatable results where accuracy is critical.
The 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is equipped with a double-acting air piston that provides smooth, controlled forward and retract strokes, complemented by needle valve controls that let operators fine-tune motion to the demands of each application. A muffled exhaust system further enhances worksite comfort by reducing operational noise.
Engineered to reduce machining time, minimize parts handling, and improve finished part quality, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is a trusted production asset for manufacturers requiring consistent, close-tolerance drilling performance.
| Part Number | 8248-B8-1 |
|---|---|
| Product Type | Pneumatic Self-Feed Twin Drill |
| Free Speed | 900RPM |
| Gear Reduction | Double |
| Stroke Length | 1-1/4'' / 32mm |
| Nom Drill Cap Stlns Stl 304 | 1/8'' / 3.2mm |
| Nom Drill Cap Stl SAE 1213 | 1/8'' / 3.2mm |
| Nom Drill Cap Alum 2024-T4 | 3/16'' / 4.5mm |
| Nom Drill Cap- Wood Med Frp | 3/16'' / 4.5mm |
| Spindle Adjustment | 3/8'' to 2-1/8'' centers (9.5 to 54mm) |
| Air Inlet | 1/8'' NPT male |
| Control Ports | 1/8'' NPTF female |
| Recommended Hose Size | 1/4'' ID |
| Rec. Operating Pressure | 90 PSI / 6.2 bar |
Product image may not represent exact model.
>The 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is an advanced dual-spindle drilling solution engineered for high-efficiency production environments. Built to perform two machining operations per cycle, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill dramatically increases throughput while maintaining precision for hole center distances from 3/8” to 3-3/4”. This makes the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill ideal for close-center, high-volume aerospace and industrial machining.
Like all Ingersoll Rand automatic production tools, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is a fully self-contained unit with integrated cycle, feed rate, and motor controls. Its adjustable dual spindle heads allow operators to adapt quickly as machining requirements evolve, while the available American and metric collet ranges accommodate a wide variety of hole diameters and material specifications. Whether operating as a stand-alone tool or in conjunction with other automated components, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill delivers reliable, repeatable results where accuracy is critical.
The 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is equipped with a double-acting air piston that provides smooth, controlled forward and retract strokes, complemented by needle valve controls that let operators fine-tune motion to the demands of each application. A muffled exhaust system further enhances worksite comfort by reducing operational noise.
Engineered to reduce machining time, minimize parts handling, and improve finished part quality, the 8248-B8-1 1-1/4” Stroke Ingersoll Rand Bant-A-Matic Valve-In-Head Self-Feed Twin Air Drill is a trusted production asset for manufacturers requiring consistent, close-tolerance drilling performance.
| Part Number | 8248-B8-1 |
|---|---|
| Product Type | Pneumatic Self-Feed Twin Drill |
| Free Speed | 900RPM |
| Gear Reduction | Double |
| Stroke Length | 1-1/4'' / 32mm |
| Nom Drill Cap Stlns Stl 304 | 1/8'' / 3.2mm |
| Nom Drill Cap Stl SAE 1213 | 1/8'' / 3.2mm |
| Nom Drill Cap Alum 2024-T4 | 3/16'' / 4.5mm |
| Nom Drill Cap- Wood Med Frp | 3/16'' / 4.5mm |
| Spindle Adjustment | 3/8'' to 2-1/8'' centers (9.5 to 54mm) |
| Air Inlet | 1/8'' NPT male |
| Control Ports | 1/8'' NPTF female |
| Recommended Hose Size | 1/4'' ID |
| Rec. Operating Pressure | 90 PSI / 6.2 bar |
