Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
Phone:
800-888-4005
236 Pistol Grip Air Impact Wrench Ingersoll Rand 1/2” Square Drive. Actuation/Throttle Type/Switch Type: Trigger Air Consumption @ Load (cfm): 24 cfm Air Consumption @ Load (l/min): 680 l/min Air Inlet: 1/4” NPT Air Pressure (PSI): 90 PSI
The 236 Pistol Grip Air Impact Wrench Ingersoll Rand 1/2” Square Drive will see you through every job that walks in the door if you work in vehicle repair. The 236 1/2” is strong and reliable, with a power regulator that allows for increased control from start to finish.
The 236 1/2” Impact Wrench will put in overtime on your toughest projects. Each part is tested for quality, so you can be sure itll deliver a high-performance output every time. This impact wrench comes with a finely tuned vane motor that pairs smoothly with the jumbo hammer impact mechanism for maximum power.
Optimized for vehicle repair or maintenance repair.
The 236 Pistol Grip Air Impact Wrench Ingersoll Rand 1/2” Square Drive is backed by a 1-year warranty for peace of mind.
| Part Number | 236 |
|---|---|
| Actuation/Throttle/Switch | Trigger |
| Air Cons. @ Load (cfm) | 24 cfm |
| Air Cons. @ Load (l/min) | 680 l/min |
| Air Inlet | 1/4'' NPT |
| Air Pressure (PSI) | 90 PSI |
| Anvil Length | Standard |
| Average Air Cons. (cfm) | 4.3 cfm |
| Average Air Cons. (l/min) | 122 l/min |
| Blows per Min | 1200 BPM |
| Color | Silver |
| Configuration/Handle Type | Pistol Grip |
| Drive Size | 1/2'' |
| Drive Type | Square |
| Duty Rating | General Duty |
| End Plates | Steel |
| Exhaust Location | Bottom |
| Free Spd Sound Prssr/Pwr | 90.3 / 101.3 |
| Hammer Case | Steel |
| Handle Material | Aluminum |
| Housing Material | Aluminum |
| Impact Mechanism | Jumbo Hammer |
| Max Bolt Diameter | 1/2'' |
| Max Free Speed (rpm) | 7400RPM |
| Max Pressure | 6.2 bar |
| Max torque | 450 ft-lbs / 5400 in-lbs / 610 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Non-Biased |
| Number of Power Settings | 2 |
| Power Source | Air Powered |
| Pwr-Wgt Ratio (Torque/Wgt) | 84.9 ft-lbs/lbs |
| Product Height | 7.2'' / 183mm |
| Product Length | 7'' / 178mm |
| Product Weight | 5.3lbs / 2.4kg |
| Product Width | 2.6'' / 66mm |
| Retainer Type | Friction Ring |
| Side to Center Distance(in) | 1.3'' / 33mm |
| Standards/Certifications | Cagi B186, Iso 11148-6, Iso 15744, Iso 28927-2 |
| Tool Type | Full-size |
| UPC | 663023020266 |
| Vanes | 6 |
| Vibration Level (m/s2) | 12m/s2 |
| Warranty | 1-year |
The 236 Pistol Grip Air Impact Wrench Ingersoll Rand 1/2” Square Drive will see you through every job that walks in the door if you work in vehicle repair. The 236 1/2” is strong and reliable, with a power regulator that allows for increased control from start to finish.
The 236 1/2” Impact Wrench will put in overtime on your toughest projects. Each part is tested for quality, so you can be sure itll deliver a high-performance output every time. This impact wrench comes with a finely tuned vane motor that pairs smoothly with the jumbo hammer impact mechanism for maximum power.
Optimized for vehicle repair or maintenance repair.
The 236 Pistol Grip Air Impact Wrench Ingersoll Rand 1/2” Square Drive is backed by a 1-year warranty for peace of mind.
| Part Number | 236 |
|---|---|
| Actuation/Throttle/Switch | Trigger |
| Air Cons. @ Load (cfm) | 24 cfm |
| Air Cons. @ Load (l/min) | 680 l/min |
| Air Inlet | 1/4'' NPT |
| Air Pressure (PSI) | 90 PSI |
| Anvil Length | Standard |
| Average Air Cons. (cfm) | 4.3 cfm |
| Average Air Cons. (l/min) | 122 l/min |
| Blows per Min | 1200 BPM |
| Color | Silver |
| Configuration/Handle Type | Pistol Grip |
| Drive Size | 1/2'' |
| Drive Type | Square |
| Duty Rating | General Duty |
| End Plates | Steel |
| Exhaust Location | Bottom |
| Free Spd Sound Prssr/Pwr | 90.3 / 101.3 |
| Hammer Case | Steel |
| Handle Material | Aluminum |
| Housing Material | Aluminum |
| Impact Mechanism | Jumbo Hammer |
| Max Bolt Diameter | 1/2'' |
| Max Free Speed (rpm) | 7400RPM |
| Max Pressure | 6.2 bar |
| Max torque | 450 ft-lbs / 5400 in-lbs / 610 Nm |
| Min. Hose Size | 3/8'' |
| Motor | Non-Biased |
| Number of Power Settings | 2 |
| Power Source | Air Powered |
| Pwr-Wgt Ratio (Torque/Wgt) | 84.9 ft-lbs/lbs |
| Product Height | 7.2'' / 183mm |
| Product Length | 7'' / 178mm |
| Product Weight | 5.3lbs / 2.4kg |
| Product Width | 2.6'' / 66mm |
| Retainer Type | Friction Ring |
| Side to Center Distance(in) | 1.3'' / 33mm |
| Standards/Certifications | Cagi B186, Iso 11148-6, Iso 15744, Iso 28927-2 |
| Tool Type | Full-size |
| UPC | 663023020266 |
| Vanes | 6 |
| Vibration Level (m/s2) | 12m/s2 |
| Warranty | 1-year |
